Quick Start Feature - GE Profile WPGT9350 Owner's Manual And Installation Instructions

Getting
Started
If the Touch
Screen is
dark, press
POWER or
the Touch
Screen to
access the
wash cycles
menu.
Select one of the five wash methods from the
Home Screen:
• Press BY COLOR to wash according to fabric
• Press BY GARMENT to wash according to
• Press BY FABRIC to wash according to fabric
• Press SPECIAL CYCLES to wash non-garment
• Press STAIN INSPECTOR to wash items with
After selecting a wash method, use the Touch
Screen to select a specific wash cycle to match
your load.
Change any of the automatic settings, if
desired, by pressing the Touch Screen
and following the on-screen instructions.
By changing the settings you can:
• Remove heavier soil.
• Change the water temperature.
• Change the wash action to Vigorous, Normal,
• Set a Delay Start, Extended Spin, Presoak or
• Adjust time settings.
Close the lid and press START.
The washer will not fill unless the lid is closed.
After you press START, a Cycle Status screen
will appear to indicate what stage of the cycle
the washer is in and the time remaining in
the cycle.
Loosely load clothes no higher than the top
row of holes in the washer tub. Overloading
may reduce washer efficiency and possibly
increase wrinkling.
Add a low-sudsing, high-efficiency detergent.
Add diluted fabric softener, bleach or wash
boost additives as desired.
color.
clothing type.
type.
items, or to select a rinse and spin or spin-
only cycle.
specific types of stains.
Delicate or Hand Wash.
Extra Rinse, or change the End-of-Cycle
Signal volume.
Quick Start
www.GEAppliances.com
TOUCH TO SELECT WASH CYCLE
COLOR
BY
SPECIAL
BY
FABRIC CYCLES
Home Screen
SUMMARY SCREEN
COTTONS
CYCLE SOIL
WASH ACTION OPTIONS
NORMAL
S
TART
S
TOP
GARMENT
BY
STAIN
INSPECTOR
TEMP
TIME
0:54
5