GE Profile WPGT9350 Owner's Manual And Installation Instructions page 30

The following are normal sounds you may hear:
Sound
Repeated starting and
stopping
Sound of water being added
after the washer has already
been operating
Clicking sound during the
wash cycle
High-pitched noise during the • The wash basket spins faster to remove moisture from the load.
spin cycle
Water flushing sound
Humming noise during
draining
Pinging noise during the spin • The washer has special rinse features to remove detergent residue from the load after the
or rinse cycle
Water sloshing sound when
washer is turned off and tub
is rotated
30
Description
• The HydroWash
™ action spins the wash basket in one direction, then pauses and spins in
the opposite direction to clean your items.
• The washer adapts to the load size and type to add more water to the cycle as needed.
• The wash load may be unbalanced. If the washer senses that the load is unbalanced, it will
stop and refill to redistribute the load.
• The washer may be diluting laundry additives to add to the wash load.
• The washer will make a series of clicking noises as it changes the cleaning mode.
• The washer is diluting laundry additives to add to the wash load. Wash Boost additives
are dispensed during presoak. Detergent is dispensed at the beginning of the wash cycle.
Bleach is dispensed during the main wash. Fabric softener is dispensed during the
final rinse.
• The pump is operating to remove water from the basket.
main wash cycle.
• A liquid in the balance ring around the wash basket helps the basket spin smoothly.
Problem Solver
www.GEAppliances.com