Technical Support - MediaMatrix CAB 8n Hardware Manual

Appendix A - Reference Information
.
Front panel LEDs
Meter LED displays
(numbered 1-4 and 5-8)
Top line flashing
All LEDs flashing on and
off
LEDs changing in time to
audio
LED column moving left to
right
LED row moving bottom to
top
Arrows moving left to right
across LED bar
No LEDs lit

Technical Support

When you require assistance with your product, you can get help from several sources. Apart
from the online Knowledge Center, there are many technical documents, white papers and
application notes on our website and on other websites on the Internet, covering subjects
including Python programming, SNMP and serial control.
If you cannot find the information you require, contact your dealer or distributor. If you are
still unable to solve the issue, you can contact us directly using the details below. MediaMatrix
has an extensive Technical Services Group that provides technical support, repair and
implementation services.
Peavey Electronics Corp.,
MediaMatrix Division,
5022 Hartley Peavey Drive,
Meridian, MS 39305, USA.
34
Meaning
The unit is in boot loader mode but has no programme code to
run.
The unit is in boot loader mode and has programme code which
it can run.
Normal display mode for the unit. Each numbered column of
LEDs represents the dB level of the corresponding channel.
No NION is controlling this CAB.
The unit is in test mode. This display is shown when the CAB is
starting up.
The unit is in standby mode. It has been connected to another
CAB via the Fault connector at the rear of the unit.
When a unit is a slave in a master/slave configuration, this
display is shown continuously. If a master unit fails, but is then
subsequently available, this display will be shown momentarily
before the master assumes control from the slave unit.
The unit is powered and connected to the CobraNet network, it
has been assigned a hardware ID from NWare and is now being
controlled by a NION. No audio is passing through the unit.
Version 1.7.1.0 July 23, 2014