Table of Contents
Advertisement
Chapter 4 - Installing the CAB 8n
.
Introduction
The CAB 8n is a 1RU device that can be mounted in a number of configurations:
In a 19" EIA equipment rack tray with one unit in the tray.
In a 19" EIA equipment rack tray with two units in the tray.
On a surface
Under a surface. The CAB 8n has four holes that pass right through the case (indicated by
the circles below), which are designed to allow it to be fixed under a surface by #8 or M4
screws.
14
This product should be installed so that its mounting position does not interfere with
proper ventilation. Do not block air intake or exhaust vents.
Version 1.7.1.0
July 23, 2014
Advertisement
Table of Contents
