Table of Contents
Advertisement
CAB 8n Hardware Manual
Master/slave mode
In this scenario, two CAB 8ns are connected to the CobraNet network and also connected
together via the rear Fault IO connectors to provide a redundant system.
If a fault occurs on the master CAB, the slave will automatically take over and allow audio to
continue to flow through the system.
The amplifier is wired to both CABs, so that when a switchover is made from the active to the
standby unit, the interruption in audio output from the speakers is minimized.
July 23, 2014
Version 1.7.1.0
23
Advertisement
Table of Contents
