Phone Calls; Display Settings - Kyocera DuraPro E4277 Quick Start Manual

Phone Calls

Make a Phone Call
1. Enter a number from standby mode.
2. Press to delete one or more digits.
3. Press ,
button.
4. Press when you are finished.
Answer an Incoming Call
Press to answer an incoming call.
When the phone is closed, open the phone.
In-Call Options
Pressing OPTIONS (right softkey) during a call
displays a list of available in-call features. To select
an option, highlight the option and press
Transfer Audio to switch the call to a Bluetooth
device (if applicable).
Save to save the current call's phone number in
your Contacts.
Contact Details to display information about the
caller stored in your Contacts.
Main Menu to display the phone's main menu.
3-Way Call to open a call with two other parties.
Contacts to display your Contacts list.
Voice Memo to record the other party's voice.
4 Get Started
, or the external speaker
Phone Info to display information about your
phone.
Further options may also be available.
Press MUTE/UNMUTE (left softkey) to mute/
unmute the microphone.
Press the volume button up or down to adjust the
receiver volume.
Press
the speaker on. Press again to turn it off.
Warning: Because of higher volume levels, do not

Display Settings

Change the Screen Saver (Wallpaper)
.
1. Press
Screensaver.
2. Select a screen saver option by pressing the
navigation key up or down, and select a screen
saver.
or the external speaker button to turn
place the phone near your ear during
speakerphone use.
> Settings > Display >