Canon Laser Shot LBP-1120 Getting Started Manual page 5

3
Place the cartridge on a sturdy surface. Snap the tab at the end of the cartridge
backwards and fold it back and forth until it is loose. Then pull the sealing
tape in the direction indicated in the illustration below.
Sealing tape
Pull in this direction
CAUTION
If you get loose toner powder on your hands or clothing, wash it off with cold
water immediately. Using warm water may fix the toner to your hands or
clothing, making it difficult to remove.
4
Open the front cover.
Pull within this angle
5
Insert the cartridge into the printer along the guides. Make sure that the
cartridge slides all the way inside the printer.
6
Close the front cover.
4