Canon Laser Shot LBP-1120 Getting Started Manual page 10

2
Select [Search for the best driver for your device (Recommended)] (for
Windows Me, select [Specify the location of the driver (Advanced)]), in the
[Add New Hardware Wizard] dialog box and click [Next].
3
Insert the User Software CD-ROM into the CD-ROM drive and check only
[Specify a location]. Then click [Browse] to select the driver in the language
that you want to install.
For example, if your CD-ROM drive is drive [D], browse to [D:\English\Win98] (for
Windows Me, [D:\English\WinMe]), and click [OK].
Confirm that the folder to browse is selected under [Specify a location], and click
[Next].
9
4
Click [Next]. Installation of the USB driver begins.
Click [Finish] when the USB driver has been installed.
5
The Add New Hardware Wizard (Canon LASER SHOT LBP-1120) appears
after the USB driver has been installed. Click [Next].
6
Repeat the procedure from step 2 to step 3.