Table of Contents
Advertisement
TERMS
Be sure you read and understand each of these terms be-
fore reading the rest of the manual.
WARNING: Alerts user to avoid or correct conditions
which could cause bodily injury.
Be sure all operators of this equipment read, understand,
and follow the warnings and instructions in this manual !
GENERAL SAFETY
Use extreme care not to splash material, contaminated
flushing water, or solvent into your eyes. Wear protective
eyewear.
Be sure the area in which you are working is well venti-
lated, to avoid a buildup of harmful material fumes.
To reduce the risk of electric shock, do not expose the
system to rain . Always store the system indoors. Do not
operate the pump with the base cover removed.
ELECTRICAL GROUNDING
Electrical grounding is essential to reduce the risk of an
electric shock or other serious bodily injury from static
sparking. Read and follow the grounding instructions on
page 6 of this manual.
CAUTION: Alerts user to avoid or correct conditions
which could damage or destroy the equipment.
NOTE: Gives additional explanation of a procedure or
helpful hints.
WARNING
EQUIPMENT MISUSE HAZARD
This system is designed to be used at 250 psi (17.5 bar)
MAXIMUM WORKING PRESSURE . Use only compo-
nents or accessories which are designed for use with the
PT2000 System.
Any misuse of this equipment, such as modifying parts,
using incompatible material or solvent, or using worn or
damaged parts, can cause the equipment to rupture and
result in serious bodily injury, fire, explosion and property
damage.
Never alter or modify any part of this equipment; doing so
could cause it to overpressurize or malfunction.
Check all parts of the system regularly and repair or re-
place any worn or damaged parts immediately.
HAZARD OF USING FLUIDS CONTAINING
HALOGENATED HYDROCARBONS
Never use 1,1,1–trichloroethane, methylene chloride,
other halogenated hydrocarbon solvents or fluids con-
taining such solvents in this equipment. Such use could
result in a serious chemical reaction, with the possibility
of explosion, which could cause death, serious bodily in-
jury and/or substantial property damage.
Consult your material suppliers to ensure that the fluids
being used are compatible with aluminum and zinc parts.
Advertisement
Table of Contents
