1.3
Front Panel and LED Indicators
LED
Status
On
POWER
Off
On
SYSTEM
Slow Blinking
On
WAN
Blinking
Slow Blinking
WLAN
Blinking
On
LAN
(1/2/3/4)
Blinking
On
Off
WPS
Slow Blinking
www.encore-usa.com
Description
The router power is on.
The router power is off.
The router is starting the system.
The router system is ready to work.
WAN port is successfully connected
The router is sending or receiving data
through the WAN (usually is your
cable/DSL modem).
Wireless network is ready.
The router is sending or receiving data
over the
wireless
network.
LAN port is successfully connected.
The router is sending or receiving data
over the
wired
network.
The WPS LED keeps on for around 8
seconds while the system is starting.
The WPS PBC/PIN function is not running.
The WPS PBC function is running and last
for 2 minutes after pressing and holding
the WPS button for 3 or more seconds.
3