Table of Contents
Advertisement
f.
"
I
r
74
73
The MIDISTUDIO 688 operates to its full potential when
interfaced with the MIDHZER, an Intelligent, highly
versatile aerial synchronizer, which provides a link
between SMPTElEBU based 8udlolvideo production and
MIDI music cre'ation.
It 8hifts between time code and
MIDI data to conatantly adapt the 688 and other
associated machines/unit!! to ever changing requirements
of each application.
Specifically, advanced
functl~~8'
-.he
MlDiiZER provides
access
to,
include Rccord On/Off programming (up to 16
Individual tracks). 20-polnt Autolocation either referenced
to time code address or MIDI
coded
bar/beat numbers,
Time code triggered event!!. MIDI Program Change which
can
be
controlled with time code
too,
and more.
"ACCESSORY 2" SERIAL CONNECTOR
The method of communications performed in compliance
with the RS-232C standard differ depending on the
mechanical/electrical charaetari'dcs and system programs
of the associated machines/devices. and a small error In
communications thwarts the interfaced system and even
causes thia to run "wild."
For detailed technical
information about the use of the
688',
Serial Connector,
consult TASCAM or your local TASCAM dealer.
75
73. PUNCH IN/OUT jack:
Plug the optional RC-30P
footswitch In here for hands-free punch-ln.
In RHSL
and AUTO IN/OUT modes, the footswltch will also start
PLAY.
76. PHONES 1/2 jacks:
Any stereo headphone with
8
1/4" TRS stereo plug may be ph.!gged in to this jack.
Lower impedance headphones ho
8
ohms) will be
louder than high impedance' <160 to 600 ohms)
headphones In most cases.
Do not plug a standard
mono 1/4 cable into this jack under any circumstances.
74. UP/DOWN jack: Plug the optional RC-60P footswitch
here for remote control of scene displays. It has the
same effect as pressIng
UP
or DOWN and RECALL.
I
FRONT PANEL
-49-
Hide quick links:
Advertisement
Table of Contents
