Mount thermostat And Base Module
Mount tHerMoStAt And BASe
Module
Align the 4 tabs on the subbase with corresponding
slots on the back of the thermostat or base module.
Then push gently until the thermostat or base module.
To insure a solid fit between the
thermostat and the subbase:
1. Mount subbase to a flat wall
2. Use screws provided
3. Drywall anchors should be flush with the wall
4. Wires should be pushed into the wall
Revised 02-13
Subject to change without prior notice
TSTBM3H2CPH6W-A
6 720 220 376
7