FILLER PANEL INSTALLATION INSTRUCTIONS
1. Uncrate the hood and lay
it on the floor with
protective material
between the hood and the
floor (See Fig. 8, page 8).
2. Bolt the filler panels
together with 5/16 in. bolts
provided in the hardware
package.
3. Position the filler panels to
the hood back, and tack
weld them into place (see
Fig. 17).
4. To allow for ease of
cleaning, caulk the
external seams with NSF
approved silicone caulk
(GE SCS-1009, or its
equivalent). The caulk is
not provided.
Return to Page 8.
16
Fig. 17
HOOD
®
HOOD
RIGHT FILLER PANEL
BOTTOM FILLER PANEL
TACKWELDED TO HOOD BACK
5/16 IN. X 3/4 IN. BOLTS WITH
WASHERS & NUTS
HOOD
April 2005