Table of Contents
Advertisement
VIVOTEK
Media Settings
Click Add Media on the Event Settings page to open the Media Settings page� On this page, you can
specify the type of media that will be sent when a trigger is activated� A total of 5 media settings can be
configured.
Media name: Enter a name for the media setting�
Media Type
There are three media types available: Snapshot, Video Clip, and System log� Select the item to display
the detailed configuration options. You can configure either or all of them.
Snapshot: Select to send snapshots when a trigger is activated�
■ Source: Select to take snapshots from stream 1 or stream 2.
■ Send
pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain limit� Enter a number
to decide how many images to capture before a trigger is activated� Up to 7 images can be generated�
■ Send
post-event images
Enter a number to decide how many images to capture after a trigger is activated� Up to 7 images can
be generated�
For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15
images are generated after a trigger is activated�
■ File name prefix
Enter the text that will be appended to the front of the file name.
■ Add date and time suffix to the file name
Select this option to append the date/time to the file name.
For example:
Snapshot_20080104_100341
File name prefix
Click Save to enable the settings, then click Close to exit the page.
76 - User's Manual
1 pic.
2 pic.
3 pic.
4 pic.
5 pic.
6 pic.
7 pic.
Trigger Activation
Date and time suffix
The format is: YYYYMMDD_HHMMSS
8 pic.
9 pic.
10 pic.
11 pic. 10 pic.
12 pic. 13 pic.
14 pic.
15 pic.
Advertisement
Table of Contents
