Advertisement
3.1.5 Removing the video board
(Fig.7, 8)
(1) Disconnect the card wire from the connector
CN402
on the video board. (See Fig.7)
(2) Remove the three screws H attaching the video board.
(See Fig.8)
3.1.6 Removing the tuner pack
(Fig.8, 9)
(1) Disconnect the card wire from the connector
main board. (See Fig.9)
(2) Remove the two screws J attaching the tuner pack. (See
Fig.8)
3.1.7 Removing the fan
(Fig.8, 9)
(1) Disconnect the connector wire from the connector
on the main board. (See Fig.9)
(2) Remove the two screws K attaching the fan. (See Fig.8)
CN401
and
CN712
on the
CN708
H
CN712
CN708
CN401
CN402
Fig.7
H
Fig.8
Fig.9
J
K
(No.MB505)1-11
Advertisement
