Bernina Embroidery Module Machine Owner's Manual page 13

BERNINA
Adjusting the Hoop Reference Position (aurora & artista only)
• This process calibrates the needle to the center of the hoop
• Only necessary to calibrate one hoop, as the adjustment
applies to all hoop sizes
Adjusting Embroidery Hoop (EC on PC)
This process is only necessary if the hoop center does not
correspond with the indicated hoop center of the EC on PC
display.
• place template in hoop
Note: aurora 430E/440QEE Large Oval template grid is orange
• select attached hoop
• use arrow keys to place center of template exactly under
the needle point
• press the Shift key (keep depressed)
• using the mouse, click on the icon that appears on the screen
next to the Position Hoop icon
• the adjustment will be saved
Adjusting Embroidery Hoop (on-screen)
(artista 630E/640E/730E)
• touch external Setup button.
• select the Embroidery Settings option.
• insert embroidery template into large hoop and attach hoop
to module.
Note: artista 630E/640E Large Oval template grid is orange;
artista 730E Large Oval template grid is purple.
• touch "Check"; hoop position will be read and hoop will stop
with needle over center marking of hoop template.
• if needle is not positioned directly over the center, use the
positioning arrows to make adjustments.
• touch OK; hoop setting is now saved and you may touch Esc
to leave this menu as well as the Setup menu.
BERNINA
M Y
ASTERING OUR
©2006 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Embroidery Module/Machine
E M
®
MBROIDERY ODULE
/M
2/06
ACHINE
Mastering
Your
BERNINA
Notes
®
Dealers
®
13