Bernina Embroidery Module Machine Owner's Manual page 12

BERNINA
• Secure fabric/stabilizer in the hoop
- Lay the outer hoop on a HARD, FLAT surface
- (deco 330 only: Place so the clamp lies off the edge of the
surface and the hoop lies flat.)
- Secure stabilizer to the back of the fabric by lightly spraying
stabilizer with HRFive temporary adhesive spray
- Place fabric and stabilizer on a firm surface
- Position template inside the inner hoop
- Position inner hoop on fabric, aligning any markings
- Grasping both inner hoop and fabric/stabilizer, insert them
into the outer hoop, making sure that the arrows align at
the edges of both the inner and outer hoops
- DO NOT DISTORT THE FABRIC when tightening the screw
on the hoop
- Hooped fabric should be taut, but not stretched or distorted
- Remove template before stitching
Attaching and Removing Hoop
• When attaching hoops, be sure to seat the frame securely.
• Release the clamp completely before removing the frame from
the machine
BERNINA
M Y
ASTERING OUR
©2006 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Embroidery Module/Machine
E M
®
MBROIDERY ODULE
/M
2/06
ACHINE
Mastering
Your
BERNINA
Notes
® Dealers
®
12