Mounting The Upper V-Belt Guard; Mounting The Bottom V-Belt Guard - Pfaff 1245 Instruction Manual

8

Mounting the upper V-belt guard

.01.04
3
Fig. 8 - 04
8

Mounting the bottom V-belt guard

.01.05
Fig. 8 - 05
Installation and commissioning
1
2
1
If a large balance wheel is
used, the corner 1 of the belt
guard 2 must be broken out.
● Attach belt guard section 2.
● Attach belt guard section 3.
● Adjust bottom -V-belt guard 1 so that the
motor pulley and V-belt run freely.
Please note the instructions
in the operating manual of
the drive.
21