Installation and commissioning
8
Commissioning
.03
8
Switching the machine on/off
.04
● Switch the machine on (see Chapter 7.01, On/off switch).
24
Fig. 8 - 09
● Check the machine, particularly its
1
electrical wiring for any damage.
● Remove pin 1 of the oil reservoir 2
(Fig. 8 - 09). The pin serves only to
protect the machine from damage during
transport and must not be used when
sewing.
● Clean the machine thoroughly and oil it
(see chapter 10 Care and maintenance).
● Have skilled personnel check if the ma-
chine can be operated with the available
mains voltage.
2
Do not operate the machine if
there is any discrepancy.
The machine may only be con-
nected to an earthed socket!