Selecting Operations - DeLonghi DE300 Use And Maintenance Manual

S e l e c t i n g t h e o p e r a t i o n s
S
tand-by position
Once the power outlet is plugged in, the display will show on the left side the degree of humi-
dity you want to reach (the default data is 60) and on the right side the display will show (for
a minute) two dots, followed by the room humidity level.
H
ow to Select the Desired Humidity Level
1) Push the stand-by button.
2) Press the
80% a humid environment).
3) Push the MODE button to choose the dehumidifying function; the function is selected when
the small dot on the display is under the
4) When the appliance reaches the humidity set point the appliance will automatically stop
working. As soon as the humidity increases above the set point, the appliance will auto-
matically resume dehumidification operation.
Note: The appliance is equipped with a safety device. The appliance only works after 3 minu-
tes from the last time it was turned off.
H
ow to use the FAN function
1) Push the stand-by button.
2) Push the MODE button to choose the FAN function; the function is selected when the small
dot on the display is under the
3) Press the button to modify the ventilation speed (min/med/max).
T
urbo power
1) Press the button.
2) The turbo power function is an automatic dehumidification function that is used when you
wish to operate the appliance at maximum power. When in this mode, the display will show
on the left side (two dots) and on the right side the room humidity present.
To stop the turbo power function, simply press the
H
ow to program the delayed start function: From the OFF Position
1) With the unit OFF, press the
hours after which the appliance should start functioning.
2) On the left side the display will show the number of hours after which the appliance should
start the operation (1-24h) and a small dot under the
function has been selected.
3) When the selected time is reached, the appliance will start working.
button to set the desired humidty level. (30% means a dry environment,
symbol).
button and use the
symbol).
button again.
button to set the number of
symbol indicates that the timer
9