Stopping The Engine - Poulan Pro 966681801 Operator's Manual

Stopping the Engine

Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
1. Push the blade switch down to disengage the
mower blades.
2. Raise the mower deck by pressing the release
button on the lever and pulling the lever fully
backward to the transport position.
3. When the machine is standing still, activate the
parking brake by pulling the lever upward.
4. Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
5. Move the steering controls outward.
6. Remove key. Always remove key when leaving
the mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
32
OPERATION
Disengage the mower deck
Mower deck lifting lever
Place controls in neutral position.
8011-668
8058-019
8058-190