Poulan Pro 966681801 Operator's Manual page 27

8. Press in and turn the ignition key to the start
position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
9. When the engine starts, immediately release the
ignition key back to the run position.
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth
defects or other reproductive system
damage. The engine exhaust contains
carbon monoxide, which is a odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.
10. Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed,
approximately mid throttle, for 3-5 minutes before
loading it too heavily. USE FULL THROTTLE
WHEN MOWING (no choke).
If your battery is too weak to start the engine,
it should be recharged. (See Battery in the
Maintenance section.)
OPERATION
Turn to the start position
Return to run position
Set the engine speed
0000-000
0000-000
8058-113
27