Product Features - Chicago Electric 66745 Set Up And Operating Instructions Manual

pressure adjust Knob
(69a):
Turn clockwise to
increase pressure and
counterclockwise to
decrease pressure.
Output coupler
(56a):
Connect end of
Spray Gun Hose
(20B) to here.
prime/spray Knob (39a):
Turn horizontally to run the
Sprayer in "paint" mode.
Turn vertically to run Spray-
er in "prime/clean" mode.
spray Valve (23B):
Valve turned in "clean" mode.
Clean Mode
SKU 66745

prOduct Features

power switch
(33a):
Press to turn the
Sprayer on or off.
siphon hose (50a):
Siphons paint from the
paint container into the
Spray Gun.
For technical questions, please call 1-800-444-3353.
return tube
(43a):
Paint flows
spray Valve (23B):
from Return
Use to switch
Tube once
between "clean"
pressure is
and "spray" modes
released in
(see below).
system.
saddle (21B)
and saddle
seal (22B):
Housed inside
the Guard and
serve as gas-
ket and seal.
trigger
guard (3B)
trigger (16B):
Press to spray or
clean.
spray Valve (23B):
Valve turned in "spray" mode.
guard (24B):
Thread Spray Valve
(23B) into top of Guard.
safety lock
(18B):
Turn up to
keep Trigger
from being
pressed.
air supply
connector (13B):
Connect end of Spray
Gun Hose (20B) to
here.
Spray Mode
Page 12