Table of Contents
Advertisement
Operation
● The number of crew (0 to 254 or unknown), passengers (0 to 8190 or unknown) and other shipboard
personnel (0 to 254 or unknown).
● The number of assisting tugboats (from 0 to 6).
The additional identification information can be entered via the main menu. Press the 'Menu' key then select
the 'Voyage data' sub-menu. When the AIS transceiver is operating in Inland AIS mode the voyage data entry
screen will be extended to allow input of the additional information described above.
The following standard AIS voyage information must be updated for Inland AIS:
● Destination
The voyage destination should be entered using UN terminal location codes and ERI terminal codes where
possible.
3.19.4 Blue sign operation
A 'blue sign' switch may optionally be connected to the AIS transceiver during installation. This switch sets the
'blue sign' status in transmitted inland AIS position reports to either 'Set' or 'Not set'. If a blue sign switch is not
installed the blue sign status is transmitted as 'not available'.
If a blue sign switch is installed it should be set according to the current navigational situation. The current blue
sign status will be displayed on the own vessel data screen.
Page 30
Advertisement
Table of Contents
