Figure 27 The Installation Menu - Humminbird AIS 100 Installation And Operaion Manual

Class a ais transceiver
Table of Contents

Advertisement

Operation
3.16.4 Installation menu
The installation menu provides access to settings that are required during installation of the transceiver. Please
refer to the installation section of this manual for more detailed information on installation settings and
requirements. Some settings in the installation menu are password protected and should only be adjusted by
authorised personnel.

Figure 27 The installation menu

The available settings and options are:
● Set identification - entry of vessel identification information including MMSI number, name, call sign,
vessel type and IMO number. This menu is password protected.
● Dimensions - entry of vessel dimensions and location of internal and external GNSS antennas. This
menu is password protected.
● Change password - entry of a new system password. This menu is password protected.
● Regional areas - through this menu option the user can list, edit and add regional area definitions.
See section 4.8. This menu is password protected.
● Sensor configuration - this sub menu allows the communication speed of the three sensor data input
ports. See section 4.4.3. This menu is password protected.
● Inland AIS Settings - see section 3.19.
● Set Power - manual setting of the AIS transmitter power to either 1W (low power) or 12.5W (default,
high power).
● Inland AIS – this menu option allows selection of either standard (SOLAS) AIS operation or Inland
AIS operation. See section 3.19 for further details
● Set power - the transmitter power setting can be manually adjusted to 12.5W (default) or 1W (low
power) output.
● GNSS settings –The operating mode of the internal GNSS receiver can be configured to one of the
following options:
Note - This option is only displayed for transceiver variants with dual mode internal GNSS.
○ GLONASS and GPS (combined operation, default)
○ GPS only
○ GLONASS only
Page 26
13:20:47
OK
INSTALLATION:
SET IDENTIFICATION
DIMENSIONS
CHANGE PASSWORD
REGIONAL AREAS
SENSOR CONFIGURATION
INLAND AIS
Back
INT
GPS
Selec t

Advertisement

Table of Contents
loading

Table of Contents