Samsung SNV-5080R User Manual page 89

upgrade / reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <upgrade / reboot>.
3. Select a desired item and set it
appropriately.
• Upgrade : Performs upgrading the
system.
• Factory default : Resets the system
to the factory default.
- Except network parameter : Reset the other settings except for Network settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
`
found, the previous settings will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
• Restart : Restarts the system.
to perform the upgrade
1. Click [upgrade].
2. Click [Browse] and specify a file to
upgrade.
3. Click [Send].
4. The "upgrade" dialog appears where
the progression will be shown in the
bottom.
5. Once completed upgrading, the
browser exits and the camera restarts.
English _89