Samsung SNV-5080R User Manual page 85

network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
<event ( )> tab.
2. Click <event setup>.
3. Select <network disconnection> from
<event action setup> .
4. Set whether or not to <enable> .
5. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 75)
6. When done, click [apply (
alarm output setup
1. From the Setup menu, select the
<event ( )> tab.
2. Click <alarm output setup>.
3. Set the camera's type of alarm output.
If you change the alarm output type, the alarm
`
out button on the monitoring page and alarm
output type displayed on Event Setup page will
be changed accordingly.
• Type
- Normal open : Considers "Open circuit" status of the sensor or alarm input device
as normal, and triggers alarm event if becomes "Closed circuit" status.
- Normal close : Considers "Closed circuit" status of the sensor or alarm input device
as normal, and triggers alarm event if becomes "Open circuit" status.
)].
English _85