Samsung SNV-5080R User Manual page 15

installing on the ceiling directly
1. Remove the top cover from the case by referring to the "Disassembling" section.
(page 14)
2. Drill a hole (diameter: 5mm, depth: min 35mm) in a
desired position of the case bottom and insert the
provided plastic anchor (HUD 5) to the end.
3. Fit the bottom hole to the anchor hole and insert
and fix the ASSY taping screw (TH M4×L30).
When assembling the camera case to a junction box, select
`
appropriate screw holes on the case bottom for installation.
4. Connect and arrange the necessary cables lest that
they should be damaged or twisted while installing
the camera.
5. Install the camera body in the reverse order of
"Disassembling".
6. Adjust the lens in a desired direction by referring to the "adjusting the monitoring
direction for the camera" section. (page 19)
7. Close the top cover.
To ensure waterproofing, tight up the fixing bolts using the L-wrench.
`
For improved EMC performance, it is recommended to
`
use the insulation cap provided as an accessory. (x3)
CAMERA FRONT
English _15