Installation Checklist; Inboard Autopilot System - Raymarine SPX 10 Installation Instructions Manual

Hide thumbs Also See for SPX 10:
Table of Contents

Advertisement

2.2 Installation checklist

Installation includes the following activities:
Installation Task
1
Plan your system.
2
Obtain all required equipment and tools.
3
Site all equipment.
4
Route all cables.
5
Drill cable and mounting holes.
6
Make all connections into equipment.
7
Secure all equipment in place.
8
Power on and test the system.
Schematic diagram
A schematic diagram is an essential part of planning
any installation. It is also useful for any future additions
or maintenance of the system. The diagram should
include:
• Location of all components.
• Connectors, cable types, routes and lengths.
Planning the installation

2.3 Inboard autopilot system

A typical inboard autopilot will consist of the items
shown:
1
SMART
2
1. Autopilot control head — This provides the
display and controls required to use the autopilot.
Multiple controllers can be added if required, for
example a controller at each helm position.
2. Course computer — This is the central intelligence
hub of the autopilot system, linking the control head
to the drive unit.
3. Drive unit — The drive unit interfaces with your
boat's steering system.
4. Fluxgate compass— The fluxgate compass
provides the autopilot with a magnetic heading
required for maintaining a course.
5. Rudder reference — Required for some systems
only. This provides feedback from the rudder and
can enhance steering performance.
Note: Hydraulic drive units should always use a
rudder reference transducer. If in any doubt please
contact Raymarine customer support.
In addition the autopilot may receive data from other
components, for example:
• Multifunction display — The autopilot can connect
to a compatible multifunction display. This provides
enhanced capabilities for creating and following
routes.
• GPS — Usually received from a multifunction display,
the autopilot uses position data when following routes
and calculating the optimum course to steer.
• Wind transducer — The autopilot can steer relative
to a specified wind angle.
D10432-2
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spx-solSpx 30

Table of Contents