Sony STR-DA3100ES Service Manual page 11

HISTORY MODE
The state that the set is used is memorized.
Procedure:
[A.F.D]
1. While pressing the
press the button to turn on the main power.
I/1
[MAIN MENU]
2. The dial is turned, and "HISTORY MODE" is
displayed.
[MENU]
3. Each time the dial is turned clockwise, the item is
switched in order as follows.
Note: The parameter is memorized when "PROTECTOR 21" is
generated, and it doesn't update the parameter thereafter
when other protector is generated, the parameter when data
is updated every time, and protector was generated at the
end is memorized.
Items
Detected protect code
Number of protector is generated
Use time from –∞ to –21dB
Use time from –20dB to –14dB
Use time from –13dB to –11dB
Use time from –10dB to –8dB
Use time from –7dB to 0dB
Use time from 0dB to +15dB
Input when protect is detected
Input mode setting
Stream under input
Channel information
Sound field setting
State of speaker switch
State of headphone
Level collection value of
each channel
EQ setting value
[MEMORY/ENTER]
and buttons,
Display
PROTECT CODE XX
PROTECTOR COUNT XXX
VOLUME –21dB XXXX: XX
VOLUME –14dB XXXX: XX
VOLUME –11dB XXXX: XX
VOLUME –8dB XXXX: XX
VOLUME 0dB XXXX: XX
VOLUME +15dB XXXX: XX
PRT INPUT XXXXXXXX
PRT IN-MODE XXXXXXXX
PRT STREAM XXXXXXXX
PRT CONFIG XXXXX
PRT SF XXXXXXXXXXXX
PRT SP SW XXX
PRT HEADPHONE XXX
PRT BAL L______I_______R
PRT C LEV XXX.XdB
PRT SRL LEV XXX.XdB
PRT SRR LEV XXX.XdB
PRT SB LEV XXX.XdB
PRT SBL LEV XXX.XdB
PRT SBR LEV XXX.XdB
PRT SW LEV XXX.XdB
PRT M CH1 SW XXX.XdB
PRT M CH2 SW XXX.XdB
PRT EQ.FBG XXXdB
PRT EQ.FBF XXXdB
STR-DA3100ES
11