HYOSUNG Motorcycle User Manual page 65

◉ HEAD LAMP
1. Remove the three screw
and upside) and the headlamp assembly.
8
2. Disconnect the headlamp coupler.
3. Remove the dust cover
③
spring .
4. After removing the bulb at the socket,
replace the new bulb.
5. To install the headlamp, reverse the
above sequence.
CAUTION
The use of a lamp other than specifica-
tion may cause to occur the vehicle fire
and to damage electric parts.
Surely use the only lamp of proper
capacity.
①
①
(right, left
③ ②
②
and socket
65
◉ TURN SIGNAL LAMP
1. Remove the lens by removing the
screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new lamp, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.
◉ TAIL / BRAKE LAMP
LED(Light Emitting Diode) type.
If any abnormal condition are found,
replace the tail/brake lamp assembly.
�
s the tail/brake lamp is