Adjusting The Flash Intensity - Samsung EK-GN120 User Manual

Table of Contents

Advertisement

Camera: Shooting options and settings
• 2 nd Curtain: Use this to fire the flash just before the shutter closes. The camera takes a
photo of a subject later in an action sequence clearly.
• K eep the flash retracted when not in use to avoid damage.
• F orcing the flash to open may cause damage to the camera.
• U se only Samsung-approved flashes. Using incompatible flashes may damage your
camera.
• T here is an interval between two bursts of the flash. Do not move until the flash
fires a second time.
• I f you select Off, the flash does not fire even when an external flash is attached.
• I f light from the flash is reflected, or if a substantial amount of dust is in the air, tiny
spots may appear in the photo.
• I f you attach an intensity-adjustable external flash to the camera, the intensity
settings of the flash will be applied.
• I f the subject is too close when you use the flash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lenses.
• W hen a lens hood is attached, the light from the flash can be blocked by the hood.
Remove the hood to use the flash.

Adjusting the flash intensity

When the flash is on, adjust the flash intensity.
Tap
next to an option, and then drag the slider or tap
Ball moving direction
87
or
to adjust the intensity.

Advertisement

Table of Contents
loading

Table of Contents