Adjusting The Flash Intensity - Samsung EK-GN120ZKAXAR User Manual

Notes/Tips
•
There is an interval between two bursts of the flash. Do not move
until the flash fires a second time.
•
If you select Off, the flash does not fire even when an external
flash is attached.
•
If light from the flash is reflected, or if a substantial amount of
dust is in the air, tiny spots may appear in the photo.
•
If you attach an intensity-adjustable external flash to the camera,
the intensity settings of the flash will be applied.
•
If the subject is too close when you use the flash, some light may
be blocked, resulting in a dark photo. Ensure that the subject is
within the recommended range, which varies by lenses.
•
When a lens hood is attached, the light from the flash can be
blocked by the hood. Remove the hood to use the flash.

Adjusting the Flash Intensity

When the flash is on, adjust the flash intensity.
Touch next to an option, and then drag the slider or
touch or to adjust the intensity.
AF Mode
Use this option to select a focus mode appropriate to the
subject.
If the lens has an AF/MF switch, you must set the switch to
select the focus mode that you require. Set the switch to AF
to select either Single AF or Continuous AF. Set the switch to
MF to select Manual focus.
Touch
• Single AF: Use this to capture a still subject. When you half-
press the Shutter button, the focus fixes in the focus area. The
area turns green when the focus is achieved.
• Continuous AF: Use this to capture fast moving subjects.
When you half-press the Shutter button, the camera continues
to focus. Once the focus area is fixed on the subject, the
subject is always in focus even when moving.
• Manual focus: Use this to manually focus on a subject by
rotating the focus ring on the lens. MF assist helps you achieve
a focus easily. While you are rotating the focus ring, the focus
area is magnified. When you use Focus peaking, the color you
selected appears on the focused subject.
AF and select an option.
Camera Operation 61