Baxi Platinum Combi 24 HE User's Operating Instructions & Important Warranty Information page 5

Fig. 10
Central Heating
Temperature Control
Fig. 11
Domestic Hot Water
Temperature Control
1.0 Operating the Boiler
1.6 Temperature Control
1. Central Heating: The central heating hot water flow
temperature can be adjusted between 25° C minimum
and 80° C maximum.
2. Turn the control knob clockwise to increase the
temperature (Fig. 10). As the control knob is turned the
selected temperature is displayed for approximately 4
seconds. The display then reverts to the current boiler
output temperature.
3. In normal winter usage we recommend that the central
heating temperature be set at maximum.
4. Domestic Hot Water: The temperature of the domestic
hot water can be adjusted by turning the control knob
clockwise to increase up to a maximum of 60° C (Fig. 11).
As the control knob is turned the selected temperature is
displayed for approximately 4 seconds. The display then
reverts to the current boiler output temperature.
5. The temperature of the water is also dependent on the
water flow rate and the temperature of the mains coming
into the house.
6. By slightly reducing the flow from the tap the
temperature will increase up to the maximum if required.
7. The flow rate can be reduced down to as low as 2 litres
per minute. The boiler will still recognise the need to heat
the water.
5