Using The Home Theater Mode; Control Organization - One for All kameleon URC-9960 User Manual

K
AMELEON
CHECKING THE CODES (cont'd)
2. Press OTHER once.The Other programming
screen will appear:
3. Using the Number Keys, enter 9 9 0. The
bottom two IR segments will flash twice.
4. Press a desired device key once (i.e., AUX,
CBL/SAT, CD, TV, DVD, AUDIO, VCR, or PVR).
The selected device key will animate.
5. To view the code for the first digit, press 1
once. Count the number of times the two
bottom IR segments flash (e.g., three flashes
= 3) and write down the number in leftmost
box in the TV code boxes on page 9.
NOTE: If a code digit is "0", the two bottom IR
segments will not flash.
6. Repeat step 5 three more times for remaining
digits. Use 2 for the second digit, 3 for the
third digit, and 4 for the fourth digit.Write
down the code digits in the remaining TV
code boxes on page 9.
NOTE: If you enter an invalid number (e.g., 7) or
key (e.g., Play), the two bottom IR segments will
display one long flash and return to the "Other"
programming screen. Start again with step 2 above.
7. To check for codes of other devices, repeat
steps 4 to 6, but substitute the appropriate
device key for each device you are checking.
Write down the device's code digits in the
appropriate code boxes on page 9.
8. To exit programming, press HOME twice. The
display will return to the last-selected device
menu screen.
12 Checking The Codes/Using The Home Theater Mode
8-D R
EVICE EMOTE

USING THE HOME THEATER MODE

The OFA Kameleon 8-Device Remote includes a
custom Home Theater mode. After the Home
Theater key is programmed, it will allow you to
access four groups of remote control keys
without having to change device modes.
C O
ONTROL RGANIZATION
A C G
BOUT ONTROL ROUPS
For Home Theater programming, the remote
control's keys are grouped by type of control
into the following four control groups:
Video Playback Group:
Volume Controls Group:
Channel Controls Group:
Menu Controls Group:
A D M
BOUT EVICE ODES
Moreover, the above Control Groups can be used
in the following modes:
Video Playback Group:
Volume Controls Group:
Channel Controls Group:
Menu Controls Group:
Transport Controls
(Rewind,Play,Fast
Forward,Stop,
Pause,Record,
Skip Forward,
Skip Back),and
LIVE TV
VOL+, VOL-, and
MUTE
CH+, CH-, INPUT,
Keypad (0 ~ 9),
FAV, ENTER, and LAST
Cursor Controls
(Up, Down, Left, and
Right), OK, PAGE+,
PAGE-, MENU, INFO,
GUIDE, and EXIT
AUDIO, AUX, CBL/SAT,
CD, DVD, PVR, and
VCR
AUDIO, AUX, CBL/SAT,
CD, DVD, PVR, TV, and
VCR
AUX, CBL/SAT, DVD,
PVR, TV, and VCR
AUDIO, AUX, CBL/SAT,
CD, DVD, PVR, TV, and
VCR