C Search; Zero Return; Time Search - Durabrand RSDCC1303 Owner's Manual

Make sure ...
•
TV/VCR power must be turned on.
•
Insert a tape.

ZERO RETURN

This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1
Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2
Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
To activate "ZERO RETURN" mode
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "ZERO RETURN".
Then, press the F.FWD/B button.
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTES:
•
Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
SEARCH
•
This function will not operate in recording mode.
•
This function is not operative when a cassette tape
is not inserted in the TV/VCR.
In the example below: To watch a program after 2
hour 50 minutes from the present position, in either
direction.
1
2
Press the TIME SEARCH button (with each push it
will increase by 10 minute).
OR
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "TIME SEARCH".
Then, press the F.FWD/B button.
3
Press the PLAY/K or STOP/L but-
ton until your desired time appears.
(Example: "2:50" stands for 2 hours
– M E N U –
50 minutes)
TIMER PROGRAMMING
PICTURE CONTROL
If you wish to cancel the Time
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
Search at this point, press the MENU button on the
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
remote control.
B ZERO RETURN
TIME SEARCH
4
By pressing the REW/s or F.FWD/B button, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL THE TIME SEARCH at this
point
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
- 23 -
Insert a tape.
Select "TIME SEARCH" mode
Enter your desired time
Begin Time Search
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
TIME SEARCH
2 : 50
EN
9I03