Installing The Odd Bay Module (For Non-Tray Module) - Toshiba Qosmio F40 Maintenance Manual

4 Replacement Procedures

Installing the ODD Bay Module (For Non-tray Module)

Install the ODD bay module according to the following procedures and Figures 4-8.
1. Place the ODD bay module in the correct position and slide it in.
2. Push it in until it clicks into place.
3. Place the ODD bezel in the correct position.
4. Secure the ODD bay module with two M2x4 black flat head screw.
4-22
4.3 ODD Bay Module
Qosmio F40/F45 Maintenance Manual