Table of Contents
Advertisement
2. Installation of the CRT
Note: The replacement CRT is supplied as an assembly comprised of the CRT and the
Inner Lens with the space between them filled with ethylene glycol. Care should
be taken during handling and installation to prevent shock from disrupting the seal
or alignment between the CRT and Inner Lens. [Figure 4]
MODEL: WT-42311 / WT-A42
Figure 2
Figure 3
Figure 4
Page 13
Note: The 4 spring-loaded screws shown
in Fig 2 and labeled as "DO NOT
REMOVE", should not be loosened
under any circumstance. Doing so
will break the seal between the
CRT and the CRT-Spacer, causing
leakage of the CRT Coolant.
Advertisement
Table of Contents
