Pcb-2Hdw-3 (Output) - Mitsubishi Electric VS-50111 Service Manual

Mitsubishi electric projection television service manual
Hide thumbs Also See for VS-50111:
Table of Contents

Advertisement

MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411
SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS
CAUTION:
Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.
1b. Lenticular Screen and Fresnel Lens Removal
1. Remove the screen assembly as shown in the Cabinet Disassembly procedure.
2. Remove the Screen Frame top section by removing 4 screws (a).
3. Carefully grasp the Lenticular Screen and Fresnel Lens combination and pull upward and out
of the Screen Frame Assembly.
Note: When separating the Lenticular Screen from the Fresnel Lens, use caution
while prying the Screen and Lens apart. Use a slot type screw drive, and
remove the pressure sensitive double sided tape.
WS-55411
WS-65411
Page 13
WS-73411

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents