4 Replacement Procedures
4.11 Display Assembly
Removing the Display Assembly
To remove the display assembly, first remove the battery, keyboard, and any optional devices.
Then follow the steps below:
1.
Disconnect the LVDS cable (JP4), function button board cable (JP15), wireless LAN
antennas, CMOS cable (JP11), and microphone cable (JP16) from the system board.
JP15
JP4
JP11
4-30
JP16
Figure 4-30
Disconnecting cables
[CONFIDENTIAL]
4.11 Display Assembly
Satellite P200D/P205D Series Maintenance Manual