Connector Check And Replacement Check - Toshiba Satellite L640 Maintenance Manual

Chapter 2 Troubleshooting Procedures
Procedure 5

Connector Check and Replacement Check

HDD/SSD(s) is/are connected to the connector(s) on the system board. The connection
HDD/SSD(s) and board may be defective. Other
computer following instructions in Chapter 4, Replacement Procedures and perform the
following checks.
Check 1 Make sure HDD/SSD(s) is/are firmly
board.
If any of the connections are loose, reconn
prob lem still occurs, go to Check 2.
Check 2 (One of) HDD/SSD(s) may be fau
instru ction
prob lem still occurs, pe
Check 3 System board m
in Chapter 4, Replacement Procedu
Satellite L600/L640/L645, Satellite Pro L600/Pro L640/Pro L645 Maintenance Manual (960-Q08)
s in Chapter 4, Replacement Procedures and check the operation. If the
rform Che
ay be faulty. Replace
wise, they may be faulty. Disassemble the
connected to the connector(s) on the system
ect firm ly and repeat Procedure 1. If the
lty. Replace it w ith a new one following the
ck 3.
it with a new one f
res.
of
ollowing the instructions