Toshiba Satellite P20-25 Series Maintenance Manual page 197

4.28 FL Inverter Board
4. Remove eight M2×3 screws securing the LCD bracket (the number of bracket
screws may vary on different models).
5. Remove the LCD bracket.
6. Peel away the Kapton film securing the LCD cable.
7. Pull out LCD cable from LCD connector.
NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket. Then
replace the whole LCD module unit.
Satellite P20-25 Series Maintenance Manual
Fig 4-47: Removing the LCD cable
4 Replacement Procedures
4-81