Toshiba Satellite P20-25 Series Maintenance Manual page 146

4.10 Expansion Memory
Installing the Expansion Memory
To install the expansion memory, follow the steps below and refer to the figures in the
preceding section.
1. Turn the computer upside down.
2. Remove the two embedded screws securing the expansion memory cover.
3. Lift off the expansion memory cover.
4. Fit the expansion memory's connectors into the computer's connectors and press
carefully to ensure firm contact.
CAUTION: Do not touch the connectors on the expansion memory or on the computer.
Debris on the connectors may cause memory access problems.
5. Gently, push the expansion memory down until latches on either side engage the
expansion memory to hold it in place.
6. Seat the expansion memory cover in place and secure it with two embedded
screws.
Satellite P20-25 Series Maintenance Manual
4 Replacement Procedures
4-31