Toshiba Satellite P20-25 Series Maintenance Manual page 195

4.28 FL Inverter Board
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to the figure in the
preceding section..
1. Connect the FL cable and HV cable to the FL inverter board.
2. Seat the FL inverter board and secure it with t one M2x3 screw.
3. Secure the LCD cable with one M2x3 screw.
4. Install the display mask, display assembly, top cover, keyboard, HDD, main
module and battery pack.
Satellite P20-25 Series Maintenance Manual
4 Replacement Procedures
4-79