Sony MVC-CDZOO/CD300 Operating Instructions Manual page 36

Notes
l
Operations are not guaranteed if you connect two or more USB equipment to a single computer
at the same time (except for the USB keyboard and mouse which are provided
as standard), or
when using a hub.
l
Depending on the type of USB equipment that is used simultaneously, some equipment may
not operate.
l
Operations are not guaranteed for all the recommended computer environments mentioned
above.
q
Viewing images with a CPR/CPRW drive (page 41)
You do not need to finalize the disc. You have to install the software, DirectCD
included in the supplied CD-ROM. For details on Windows environment, refer to the
software operating instructions of DirectCD.
<cRecommended Macintosh environment>>
You cannot view images on a Macintosh computer by USB connection.
Install the driver, Adaptec UDF Volume Access included in the supplied CD-ROM
into your computer and finalize the disc to view images.
Macintosh computer with the Mac OS 8.5.1/8.6/9.0 standard installation
QuickTime 3.0 or later must be installed.
Note
Operations are not guaranteed for all the recommended computer environments mentioned above.
Notes on using your computer
Software
l
Data recorded with your camera is stored in the following formats. Make sure that
applications that support these tile formats are installed on your computer.
- Still image (except TEXT mode, uncompressed mode and Clip Motion): JPEG
format
- Moving imageiVoice memo: MPEG format
- Uncompressed mode still image: TIFF mode
- TEXT mode/Clip Motion: GIF format.
l
Depending on your application software, the file size may increase when you open
a still image file.
l
When you copy the image to the camera from your computer, which was modified
with a retouching software and was converted to another file format, the "FILE
ERROR" message may appear and you may be unable to open the image.
l
Depending on your application software, only the first frame of the Clip Motion file
may be playedkack.
Communications with your computer (for Windows only)
Communications between your camera and your computer may not recover after
recovering from Suspend or Sleep.
36