Sony MVC-CDZOO/CD300 Operating Instructions Manual page 10

Charging the battery pack
When the camera is turned on, you cannot charge the battery pack. Be sure to turn off
the power of the camera.
0 Insert the battery pack into your camera.
0 Open the DC IN cover and connect the AC power adaptor to the DC
IN jack of your camera with the A mark facing up.
0 Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The 5 /CHG lamp (orange) above the LCD screen lights up when charging
begins. When the 5 KHG lamp goes off, full charge is completed.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
recsd or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at a room temperature of 10°C to 30°C (50°F to 86°F) is recommended.
10