Sony MVC-CDZOO/CD300 Operating Instructions Manual page 34

Notes
l
It takes for about one minute to execute the finalization. Do not shake or jar the camera during
this operation. Place the camera on a stable surface during the finalization.
l
When you execute the finalization, we recommend that you use the external power
source
(page 13).
When using CD-RWs, you can cancel the last-executed finalization. Once you cancel
it, the disc space for executing the finalization is recovered.
0 Set the mode dial to the m, S, A, M, SCN, or
I#I-
"UNFINALIZE PLACE ON LEVEL SURFACE"
appears on the LCD screen. Be sure to avoid any
vibration during the unfinalization.
@ Select [OK] with A on the control button, then press 0.
To cancel the unfinalization
Select [CANCEL] with v on the control button in step 0, then press the center 0.
When it is canceled, you can continuously record an image on the CD-RW.
To unfinalize after canceling the unfinalization
Set the mode dial to SET UP, then execute [UNFINALIZE] from [ @] (DISC
TOOL) in the setup settings (page 84).
Notes
l
Untinalization cannot be executed when you record a new image or edit an image on the CD-
RW after executing the finalization.
*It takes about one minute to execute the unfinalization. Do not shake or jar the camera
during
this operation. Place the camera on a stable surface during the untinalization.
Tip
F
You can also execute the unfinalization using [ @ ] (DISC TOOL) in the setup settings
(page 84).
34