Toshiba Satellite Maintenance Manual page 69

2 Troubleshooting Procedures
Procedure 1: Bridge media assemble card test
Procedure 2: Express socket replacement check
Procedure 1 Bridge media assemble card test
The Bridge media assemble card test card contains a Bridge media assemble card test
program. Ensure the card in fully inserted into the socket before running the program.
If an error occurs during the Bridge media assemble card test, perform Procedure 2. If no
error occurs, it is likely that the original Bridge media assemble card was faulty.
Procedure 2 Bridge media assemble card socket replacement check
The Bridge media assemble card socket may be damaged or defective, for instance the socket
pins can be bent. Disassemble the computer following the steps described in Chapter 4,
Replacement Procedures If the problem persists, the system board may be defective or
damaged. Replace the system board with a new one following the steps in Chapter 4.
Satellite L450D/455D, Satellite pro L450D Series Maintenance Manual
35