Troubleshooting Procedures
2.16 Bluetooth Troubleshooting
To check if the computer's B
procedure below as instructed.
Procedure 1: Connector Check and Replacement Check
Procedure 1
Connector Check and Replacement Check
The B
tooth function is connected to system board. If B
connection is defective or B
Check 1
Make sure B
. If the problem still occurs, perform Check 2.
Check 2
B
tooth cable may be faulty. Replace it with a new one. If the problem s till
occurs, perform Check 3.
Check 3
B
tooth may be faulty. Replace it with a new one following the steps in Chapter
4. If the problem still occurs, perform Check 4.
Check 4
System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
Satellite P500 Maintenance Manual (960-Q08)
tooth is malfunctioning or not, follow the troubleshooting
tooth cable and system board may be faulty.
tooth cable is firmly connected to the connector CN13
tooth malfunctions, its
48