Technical Specifications - A.O. Smith BFC-28 Installation, User And Service Manual

is
3.4 Technical
specifications
Instruction manual BFC
Working clearances
BFC 28 thru 60
Note
When installing the water heater, be aware that any leakage from the tank
and/or connections can cause damage to the immediate environment or floors
below the level of the boiler room. If this is the case, the water heater should be
installed above a waste water drain or in a suitable metal leak tray.
The leak tray must have an appropriate waste water drain and must be at least
5 cm deep with a length and width at least 5 cm greater than the diameter of the
water heater.
The water heater is supplied without accessories. Check the
dimensions (3.4 "Technical specifications"), gas data (3.4.3 "Gas data") and
other specifications (3.4.2 "General and electrical specifications") of any
accessories you plan to use.
IMD-0765 R0
BFC 80 thru 120
19